Description
Discover accuracy and clarity like never before with the Leupold Freedom RDS 1x34mm .223 BDC Red Dot Sight, a pinnacle of design for rifle enthusiasts. This high-quality optic is engineered for precision with its pre-calibrated BDC dial, optimized for 5.56/.223 55gr rounds, enabling meticulous adjustments up to 400+ yards. The crystal-clear 1 MOA Red Dot facilitates fast target acquisition while maintaining an unobstructed field of view.
Built to withstand the rigors of the field, the Leupold Freedom RDS is rugged and reliable. The lightweight and compact form factors make it an effortless addition to your rifle without adding cumbersome weight. A noteworthy battery life further ensures that your sight is ready whenever you are. Boasting Leupold’s legendary quality, this red dot sight promises to elevate your shooting experience, ensuring precision and dependability shot after shot.
Whether you're on the hunt or at the range, the Freedom RDS offers rapid engagement with your targets. Designed with the shooter in mind, this sight includes an AR-specific mount for straightforward installation. With its intuitive operation and energy-efficient construction, it's the perfect choice for shooters looking to enhance their firearm's capabilities with minimal fuss and maximal performance.
Features
- PRECISION AIMING: Pre-calibrated BDC dial specifically for 5.56/.223 55gr rounds ensures precise adjustments out to 400+ yards.
- RAPID TARGET ACQUISITION: A crisp 1 MOA Red Dot provides a clear aiming point for quick and efficient targeting.
- BUILT TO LAST: Rugged design with a weight of 13.1 ounces (with mount and BDC), promises endurance and reliability in diverse conditions.
- LONG BATTERY LIFE: Features at least 1000 hours of battery life on brightness level 4, using a common CR2032 battery.
- INCLUDES MOUNT: Comes with an AR-specific mount, allowing for easy attachment and optimal positioning on your rifle.
- EASE OF USE: Boasts 8 brightness settings for optimal visibility in any light conditions, easily adjusted to suit your needs.
- OPTIMAL OPTICS: Offers a generous 34mm objective lens diameter for a wide field of view without compromising the sight picture.
- FULLY FEATURED: The sight is new in condition, night vision not compatible, and comes with everything needed to mount and start shooting.
Specifications
| Specification | Detail |
|---|---|
| Magnification Range | 1x |
| Reticle Design | 1 MOA Red Dot |
| Objective Lens Diameter | 34mm |
| Dimensions | 5.3" |
| Weight (no mount/battery) | 7.2 oz. |
| Weight (with mount/battery/BDC) | 13.1 oz. |
| Battery Type | CR2032 |
| Brightness Settings | 8 |
| Product Type | Reflex Sight/Red Dot |
| Item Condition | New |
| UPC | 030317026721 |
| MPN | 180093 |
Included In The Box
- 1x Leupold Freedom RDS 1x34mm .223 BDC Red Dot Sight
- 1x AR-specific mount
- 1x CR2032 battery
- User manual
Our Guarantees
FREE Fast Shipping Over $99
Enjoy complimentary expedited shipping on all orders over $99.
Secure Payments
Shop with confidence using our encrypted payment processing.
High Quality or Money Back
Not satisfied with your purchase? We'll refund your money, no questions asked.
Top-Notch Support
Our expert team is available to answer all your questions and provide assistance.
What Our Customers Say
Optics Knowledge Center
Understanding Rifle Scope Basics
Magnification
Magnification refers to how much larger an object appears through the scope compared to the naked eye. Fixed power scopes have one magnification setting, while variable power scopes offer a range (e.g., 3-9x).
Objective Lens
The objective lens is the front lens that gathers light. Larger objective lenses (measured in mm) gather more light, providing brighter images in low-light conditions but add weight and require higher mounting.
Reticle
The reticle (crosshair) is the aiming point inside the scope. Modern scopes offer various reticle designs, from simple duplex crosshairs to complex ballistic reticles with holdover points for different distances.
Adjustments
Rifle scopes have turrets for windage (horizontal) and elevation (vertical) adjustments. These are measured in MOA (minutes of angle) or MRAD (milliradians) and allow precise aiming adjustments.
Proper Scope Mounting Guide
Select the Right Rings & Base
Choose rings that match your scope's tube diameter (typically 1", 30mm, or 34mm). Select a base compatible with your rifle's receiver. For heavy-recoiling rifles, opt for stronger mounts.
Install the Base
Clean the receiver and base thoroughly. Apply a small amount of blue Loctite to the screws. Attach the base to the receiver and torque the screws to manufacturer specifications.
Attach the Rings
Attach the bottom halves of the rings to the base. Place the scope in the rings and loosely attach the top halves. Don't fully tighten yet.
Set Eye Relief & Level
Position the scope for proper eye relief (3-4 inches) in your normal shooting position. Ensure the reticle is level using a scope leveling tool. Once positioned correctly, tighten the rings evenly in a cross-pattern.
Scope Zeroing Tips
Start Close
Begin zeroing at a shorter distance (25-50 yards) to ensure you're on paper before moving to your desired zero distance (typically 100 yards).
Use a Stable Rest
Always zero your rifle from a stable shooting position using a bench rest, sandbags, or a shooting rest to eliminate as much human error as possible.
Fire Groups
Fire 3-shot groups before making adjustments. This provides a more accurate representation of where your rifle is shooting than single shots.
Make Deliberate Adjustments
Know your scope's adjustment values (typically 1/4 MOA per click). If your group is 2 inches low at 100 yards, you'll need to adjust up 8 clicks (for a 1/4 MOA scope).
Confirm Your Zero
After making adjustments, fire another group to confirm your zero. Repeat the process until your point of impact matches your point of aim.
Document Your Settings
Once zeroed, record your settings including distance, ammunition used, and environmental conditions for future reference.
Optics Maintenance & Care
Cleaning Lenses
- Start by blowing or brushing away loose particles
- Use a lens pen or microfiber cloth for fingerprints
- For stubborn dirt, use lens cleaning solution (never household cleaners)
- Clean with gentle circular motions from center outward
Protecting Your Optics
- Always use lens caps when not in use
- Store in a dry place with silica gel packets
- Avoid extreme temperature changes
- Use a quality scope cover in harsh conditions
Regular Maintenance
- Check and tighten mount screws periodically
- Inspect O-rings and seals for damage
- Verify zero after rough handling
- Clean the exterior with a damp cloth
What to Avoid
- Never use fingers to touch lenses
- Avoid paper products (tissues, paper towels) on lenses
- Don't use acetone, alcohol, or household cleaners
- Never disassemble your scope (voids warranty)